8
ENGLISH EN
Switching on:
The first time E120 is powered on it will automatically perform a ‘BestTune scan’ which will take a couple
of minutes. If a suitable DAB / FM antenna is connected, E120 will scan and store all available DAB and
FM stations, providing one combined list with the best band option for each station.
If a scan has already been performed, E120 will power up into standby.
The exact number of DAB stations available will vary from area to area.
If you experience poor reception, it may be that you are in a weak signal area and require an external
DAB antenna (recommended), or a higher gain amplified antenna.
Configurable Switches:
There are two small switches mounted on the lower PCB that adjust the audio mode
outputs. After making a switch position change you will need to power down the
E120.
SWITCH 1 OFF – Line output is variable, adjusts with amplifier volume.
SWITCH 1 ON – Line output is fixed at 100%
SWIITCH 2 OFF – Amplifier speaker outputs are in stereo mode with separate left
and right channels.
SWITCH 2 ON – Amplifier speaker outputs are in mono mode with both left and right
channels combined on both speaker outputs.
