| +1 (866) 203-8397
Pyxis LT-635 User Manual
22
7
Sensor Wiper Replacement
Replacement of cleaning parts requires a total of 7 steps.
Step 1
Set the wiper arm assembly to a horizontal position after powering off the sensor
Step 2
Remove the M2 screw that holds the nut
Step 3
Remove the nut that retains the wiper arm assembly
Step 4
Remove the old wiper arm assembly
Step 5
Install the wiper arm assembly to the sensor
Step 6
Install the new nut on the sensor
Step 7
Install the new M2 screw into the nut
Figure 28 -Set wiper arm to horizontal position
Figure 30 -Remove the nut
Figure 29 - Take out the M2 screw that fixes the nut
Figure 31 Remove the old wiper arm assembly
[zb15]
[JD14]
Instructions