| +1 (866) 203-8397
Pyxis LT-635 User Manual
12
Figure 11
Figure 12
Trouble Shooting Steps for Failed Calibration Messages
o
The Deionized water has not been contaminated.
o
The standard solution is accurately pre-measured to verify Total Suspended Solids.
o
The sensor is clean and not contaminated with debris or other materials.
4.1.2
Restore to factory
Restore To Factory
–
If user wants to restore the sensor calibration to factory default parameters, as
shown in Figure13, click the OK option to confirm. If the restoration is successful, the interface will
return a message "Restore Succeed" (Figure 14).
Figure 13
Figure 14