*
NOTE
*
It is recommended to install the ST-730 Series sensor tee in the pipe system where
sample water flow is vertical.
4.2
ST-730SS Piping
The ST-730SS sensor has 3/4” female NPT threaded ports on the sensor itself and therefore does not require
a custom tee assembly. It is recommended that two 3/4” NPT to 1/4” tubing adapters are used to connect
the sensor to the sampling system. Sample water entering the sensor must be cooled down to below 120
°F (49 °C). The sensor can be held by a 1.75-inch pipe clamp or mounted to a panel with four 1/4-28 bolts.
See Figure 4 for ST-730SS dimensions.
Figure 4.
Dimension of the ST-730SS (inch)
ST-730 Series User Manual
| +1 (866) 203-8397
6
Summary of Contents for 50626
Page 1: ......
