Chapter 4. Accessories
Chapter 1. Description
4
PNP-MC
- Operator’s Manual
PNP-MC
- Operator’s Manual
17
1.3 PNP-MC Standard
equipment
and accessories
4
1
2
3
Fig. No. 1 - PNP-MC
standard kit
TABLE NO. 1
PNP-MC
Standard equipment list
TABLE NO. 2
PNP-MC Optional accessories
No.
Equipment
Qty
(1)
PNP-MC
pocket scope
1
(2)
Eye guard
1
(3)
Carrying pouch
1
(4)
1.5V “AA” size battery
1
(5)
Operator’s manual
1
Equipment
Adaptors for SLR and DSLR cameras
Adaptors for Camcorders
CCTV (CCD) relay lens
Face-mask
Helmet mount
Lanyard
Various adaptors for Picatinny
or Weaver rails
Bridge Kit to convert to binoculars
Hard carrying case
Please see data sheet for full list of
accessories for PNP-MC
Instructions for use
1. Place the PNP-MC rail adaptor on to the Picatinny
(or Weaver) rail and lock it in position in a suitable
position on the rail using the over-centre lever “A”.
2. Position the PNP-MC on the adaptor so that it is
located both by the side support “B” and also by
the channels “C”. Use the finger knob “D” so that
the PNP-MC is fully and firmly tightened down onto
the adaptor.
3. Adjust the fore/aft position of the PNP-MC on the
adaptor for optimum eye relief by unscrewing the
two Allen bolts “E” and moving the upper part of
the adaptor into the best position for the firer. It is
essential that two bolts are used and are firmly
tightened. One bolt is not sufficient.
4. If necessary, to optimise eye relief, reposition the
entire mount on the Picatinny rail by using the
over-centre lever.
5. The PNP-MC can be removed, if necessary, from
the mount and the mount left on the weapon in
it’s correct position for next use.
6. Remember to use day sights in front of the
PNP-MC, not behind it between the firer and the
PNP-MC and that any day sight with an
illuminated aiming mark must be “Night Vision
Compatible”. The intensity of the aiming mark
must be turned down to the minimum otherwise
a burn mark on the image intensifier tube will
result.
Interface
for fitting PNP-MC to Picatinny rail
NSN 5304-99-574-0422
Part No: 589-997M
D
E
A
B
C
N.B. Although PNP-MC can be used
on head/helmet and weapon mounted
applications, this is not advised
except for emergency use, in view of
the standard lens not being
waterproof nor resistant to recoil
shocks of weapons.
PNP-M is the recommended
product for those applications.
