background image

Chapter 2. Operating Instructions

Chapter 2. Operating Instructions

10

PNP-MC

- Operator’s Manual

PNP-MC

- Operator’s Manual

11

they will apply in most situations. 
(Tests are recommended to determine
optimum settings).     
Then for operation see 

2.4.2

paying

special attention to adjusting the
PNP-MC eyepiece dioptre setting to
give the sharpest picture. It is then
left at that setting irrespective of
camera lens focus settings.

2.5 PNP-MC Operation with 

video camera/camcorder

2.5.1 Installation

1)

Use any video camera (Sony, Sanyo,
Panasonic etc.) You will need
appropriate 28mm to x adaptor (x =
filter thread on video camera

objective lens).  Check the markings
on your video camera lens.  The
filter thread diameter is normally
marked on the end.

2)

Mount the video camera ring
adaptor to the 

PNP-MC

eyepiece

(after folding back the eye-guard).

3)

Mount the 

PNP-MC

with the

adaptor, to the video camera
objective lens.

4)

Install the system onto a tripod, if
required.

Fig. No. 7 
PNP-MC Installation on video 
camera/camcorder

VIDEO / CAMCORDER

VIDEO

CAMERA

RING

ADAPTOR

PNP-MC POCKET
SCOPE

1)

Remove original lens from 
camera (5).and set it to “Manual”.

2)

Fit appropriate optical module (4)
directly to camera then after folding
back rubber eyecup attach module 
to 

PNP-MC

(3).

3)

Attach camera lens to C-mount
adaptor (2) to 

PNP-MC 

(3). and

re-attach original camera lens

4)

The C-mount adaptor will have 
opened the lens iris to maximum. 
Set the camera film speed to 
maximum, at least ISO 1600 and use 
optimum shutter speed (60

th

or 100

th

are good starting points). The Night
Vision device gives a constant night
vision picture brightness so once
settings have been established

2.4.3 PNP-MC / camera using 

original camera & lens

1

2

3

4

5

2.5.2 System operation with 

video camera

1)

Direct the system to the required
scenery.

2)

Turn 

PNP-MC

and video camera on.

3)

Adjust video camera zoom until full

PNP-MC

phosphor screen is seen in

the video camera view finder.

4)

Set 

PNP-MC

eyepiece diopter to

midway.

5)

Adjust objective lens focus ring
while observing an object until the
sharpest image is obtained in the
video camera view finder.

DSLR Lens

DSLR Lens mount

DSLR 
Camera
body

PNP-MC body
(C-mount lens removed)

DSLR Optical Module

Summary of Contents for PNP-MC













Reviews: