Pyronix ATLAS 4, Installation Instructions Manual

Page: 3 / 28

Rins141 Issue 7 Page 3
CONTENTS
1.
INTRODUCTION 5
2.
SAFETY 5
3.
ACCESS LEVELS 5
3.1 Limited User 5
3.2 Master User 5
3.3 Engineer 5
4.
FUNCTIONAL DESCRIPTION 5
4.1 Operating Modes 5
4.2 Entry / Exit Mode 6
5.
ZONES 6
5.1 Engineer Programmable Zones 6
6.
DIAL OUT REPORTING 6
7.
FUNCTIONS 7
8.
INSTALLATION AND WIRING 10
8.1 Plan View With Cover Removed 10
9.
POWER CONNECTIONS 11
9.1 Low Voltage a.c. Connections 11
9.2 Battery Connections 11
9.3 Bell, Strobe and Extension Speaker Connections 11
9.4 Remote Keypad 'RKP' Conections 11
9.5 Programmable Output 11
9.6 Battery Capacity 12
9.7 Double End Of Line Resistor (DEOL) 12
9.7.1 Double End Of Line Resistor Wiring Diagram 13
9.8 Telephone Connections 13
9.9 Powering Up The panel 13
9.10 Atlas End of Line Wiring Diagram 14
10.
PROGRAMMING 15
10.1 Factory Defaults 15
10.2 Entering Engineer Mode 15
10.3 Resetting The Non-Volatile Memory (NVM) to Factory Settings 15
10.4 Setting The Panel When Mains Fails 15
10.5 Programming Set Modes 15
10.6 Setting The Alarm Bell Time 16
10.7 Setting Entry Time 16
10.8 Setting Exit Time 16
10.9 Changing The Engineer Code 16
10.10 Panel Tamper 16
10.11 Programming Option 1 17
10.12 System Option 1 17
10.13 System Option 2 17
10.14 System Option 3 17
10.15 System Option 4 17
10.16 Programmable Re-sets 17
10.17 Central Monitoring Station Telephone Number 17
10.18 Second Telephone Number 17
10.19 Customer Account Code 1 18
10.20 Downloading Access Code 18
10.21 Zone Alarm Reporting Codes 18
10.22 Zone Tamper Alarm Report Codes 19
10.23 System set / unset Reporting Codes 18
10.24 User Set Reporting Codes 19
10.25 User Unset Reporting Codes 19
10.26 Maintenance and Priority Codes 19