NSTALLATION INSTRUCTIONS
Continued
8
_________________________________________________________________________________________________
BATTERY INSTALLATION
PyroMania fire tables use a battery powered ignitor and are shipped without batteries supplied or installed. To install the
battery, remove the ignitor button by turning it counterclockwise. A single 1.5v AA battery is required.
LEAK TEST
Perform a leak test at least once per year. Do not use a flame to test for leaks. To perform a leak test properly, follow
these instructions:
1.
Prepare a leak testing solution of soapy water by mixing in a spray bottle one part liquid soap to one part water.
2.
Make sure the appliance control knob is in the “OFF” position
3.
Open the gas supply to the fire table.
4.
Apply the leak testing solution by spraying it on joints of the gas delivery system. Blowing bubbles in the soap
solution indicates that a leak is present.
5.
Stop a leak by tightening the loose joint or by replacing the faulty part with one specified by the manufacturer.
If you are unable to stop a leak:
1.
Turn the appliance control knob to the “OFF” position.
2.
Shut off the gas supply to the fire table and release pressure in the hose and manifold by pressing the appliance
control knob and turning it to and holding it in at the “IGNITE” position for 10 seconds.
3.
On propane systems, disconnect the propane cylinder from the fire table.
4.
Call an authorized gas appliance service technician.
I
BATTERY