Safety Notes
•
Do not remove or modify any installed safety device on this
equipment. Doing so will void your warranty and create an
unsafe operating environment.
•
Dangerous currents are present in this device. There are NO
user serviceable parts inside.
•
Only allow qualified personnel to service this unit.
•
Inspect this unit and its power supply before using it for the
first time.
•
Do not use the unit if it is damaged in any way. Contact your
dealer for repair or replacement information.
•
During operation do not cover the source.
•
Optical radiation can damage your eyes. Do not stare directly
at the light source output.
•
Electrostatic discharge can harm inside parts of the source.
Take precautions to prevent ESD.
Operation Mode
Connect a proper power source (included with the light source) prior to operation.
The light source has an On/Off power button. Push the button to turn the light source on (a green
light will shine the power button when the light source is on). Wait for 2-3 minutes before using it, in
order to allow temperature stabilization of the SLED modules.
Press the On/Off button to turn off the light source.
Cover the fiber optic output with a cap when the light source is not in use to prevent dust and dirt
from getting inside the connector.
*all the dimensions are in mm
Laser classification
This light source is associated with class 3R according to the
norm IEC 60825-1. Do not look or stare directly into the fiber
connector output, invisible radiation can harm the
users’
eyes.
FJORD-X3-1330-1550-1650
