pyrex SB-450 LUXX, Instruction Manual

Page: 16 / 20

USe yoUr KettLe with the tea/herBS acceSSory
Follow steps 1 - 4 from “use your kettle” section
1.
fill the tea/herbs filter (5) with the quantity of tea or herbs that you desire. never use tea or
herbs packed pods, always use unpacked tea or herbs.
2. place the tea/herbs filter (5) on its position into the kettle and leave it into the kettle accord-
ing to your preference. always follow the perpetration introductions that the supplier of the
tea/herbs recommends.
3. Unplug the power cord.
Warning! Do not open the lid while the water is boiling.
deScaLing
•
regular descaling of the flat element will improve the performance of your kettle. if the kettle
is not descaled regularly the build up of limescale may result in the following:
- the kettle may take longer to boil.
- the flat element may be damaged.
Please note: Not descaling your kettle may invalidate your guarantee.
When lime scale starts to build up on the heating element:
- Buy a suitable descaler from a super market and descale your kettle following the
instructions mentioned on the descaler packaging.
- after descaling, boil with fresh water several times and discard.
- clean any descaler off the kettle – it can damage the parts.
•
Some regions of the country have chalky water. this makes boiled water look cloudy and
leaves deposit on the side of the kettle. this is normal but can be removed with regular
cleaning.
•
alternatively, to reduce limescale build up, use filtered water to fill your kettle.