Adjusting the Rear Guide
The Reliance printer is shipped to you already set up for the paper width you ordered. If you
need to change this paper width, loosen the screws indicated in the figure below and push the
guides together to the desired width.
FIgure 10
For 70mm paper, align the arrows on the paper guides to the raised ribs on the printer frame as
shown, tighten screws:
Figure 11
For 60mm paper, push the paper guides together completely as shown, tighten screws:
Figure 12
For 80mm paper, push the paper guides apart as shown below, tighten screws:
Figure 13
11
