SOUND ROCkER SET-UP
1
Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
2
Place the Sound Rocker so
that the control panel is less than
11 ft./3.5 meters from the power
source.
3
Connect the power adapter
to the power DC port on the
control panel. Then, plug the power
adapter into an electrical outlet.
2
Charge the battery for 12 hours before
attempting to unplug and use remotely.
When the unit is fully charged the red
lights will shut off.
Note:
Run time of the rechargeable
battery is approximately 4-5 hours.
3
CAUTION:
Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.
Charging the Battery
The Sound Rocker is equipped with rechargeable batteries.
BLUE
Blue light indicates the power
adapter is connected and the
power is on.
RED
Red light indicates the unit
is charging when the power
adapter is connected and the
power is off. When the unit is
fully charged the red light will
shut off.
FLASHING RED
Flashing Red light indicates the
batteries are running low.
After 5 minutes of flashing
red light the unit will
automatically shut off and
will need to be plugged in.
Control Panel Indicator Lights
1
Connect the power adapter
to the power DC port on the
control panel. Then, plug the power
adapter into an electrical outlet.
