Pylontech PowerCube-X1, Operation Manual

Page: 24 / 44

EU20PIXV0501 20 / 38
3.5.4 Control Module (BMS) and all Battery Modules install into the Rack
l
Install the buckle nuts . The position of nuts must meet the position of the control module (BMS)
and all battery modules.
l
Install the control module (BMS) and all battery modules in. Each module uses 4 screws to fix.
3.5.5 Install the MBMS into a 19’ standard rack [On the top of BMS, or use the rack configured
by user]
l
Install the buckle nuts . The position of nuts must meet the position of the MBMS.
l
Install the MBMS in. Uses 4 screws to fix.
3.6 Cables connection
3.6.1 Grounding connection:
Danger: The battery system is high voltage DC system. Must make sure the grounding of the rack
is stable and reliable.
Danger: All the plugs and sockets of the power cables must be orange to orange and black to
black . Otherwise it will cause personal injury.
Danger: Isolation breakers or switches for each battery string must be installed for maintenance.
Danger: No short circuit or reserved connection of the battery system’s anode and cathode.