9
Selecting The Frequency Band
Stereo/Mono
Local/Distant
Selecting Station
Automatic Memory Storing & Program
Scanning
Station Storing
Press
button (13) to select the
desired band. The reception band will
change between FM and AM
Press
(1) or MO/ST (23) on the remote
control to select mono/stereo mode.
Press
(1) for several seconds or
LO/DX (34)
to
select between local and distant stations.
LOCAL setting is reception of strong
station, and DISTANT setting is reception
of weaker stations.
- Press
/
for several seconds until
“MANUAL” appears on the display, and
then press
button to select a
station. If both buttons have not been
pressed for several seconds, they will
return to automatic seek mode .
Press
button (18) for several
seconds, the radio searches from the
current frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.
Press
button (18) to scan preset
station. When the field strength level is
more than the threshold level of stop
level, the radio is holding at that preset
number for several seconds with release
mute, and then searches again.
- Press
button to activate automatic
BAND
ST
ST/LOC
- Automatic memory storing
AMS
- Program scanning
AMS
.
on the remote control
- Press preset
button (14) to select a
station which had been stored in the
memory.
/
/
1-6
: 9
: 9
: 9
Radio Operation
seek mode.
- In manual mode, press
button to
select a station
Press preset
button (14) for several
seconds to store current station into the
number button.
/
.
: 9
1-6
DISC Operation
Playback
1.
2.
Insert a disc with the label side facing
up; the disc will be pulled into the unit
automatically. Display the console
information of the current disc on the
screen.
For CD:
3 For MP3
.
:
1).
3).
Press
/► button to move between
work area A, B and C.
Press
button to select the
desired folder or file of this work area.
◄
2).
▲/▼
Press
button (31) to confirm
the selected item.
Press
button (16) or
button (17) to
skip to the previous track or the following
track. Track number shows on display.
Press and hold
button (16) or
ENTER
Selecting Tracks In Single Step
-
-
9
:
9
: