desired item. Also press ◄/► button (30)
to choose the desired item.
Press
button (15) to show current
information and time on the LCD Return
to original status after 5 seconds.
1). Press and hold
button (15) until
the clock begins blinking.
2). Press
or
button to move to
between hour area and minute area.
3). Rotate
button (10) or
to
adjust hour or minute.
Exhibit current information and activated
functions on the LCD display (8).
The LED
will flash if the front cover is
not inserted into the main unit.
If the unit has the electronic shockproof
function, it can be shockproof about
several seconds:
CD, VCD: 18 seconds.
MP3: 160 seconds.
DVD: 6 seconds.
MPEG4: 20 seconds.
Loudness introduces a special low- and
high-frequency emphasis at low listening
levels. This compensates for the ear's
decreased sensitivity to bass and treble
sound. Press
button (2) to switch
loudness on/off.
Press
button (3) repeatedly to cycle
though the following equalization mode:
FLAT
POP M
ROCK M
DSP OFF
1. Displaying time:
DISP
.
2. Adjusting time:
DISP
VOL
/
LOUD
EQ
Display/Adjust Time
LCD Display
Flashing LED
ESP function
Turning Loudness on/off
Equalization
9 :
/
◄/►
(26)
▲ ▼
→CLASSICS→
→
→
Mute Function
Press
button (19) to mute down the
sound instantly, press it again to recover
previous volume level.
MUTE
Mode Function
Press
(6) to switch between the
DVD, AV and TUNER.
MODE
Last Position Memory
Sub-Woofer Function
Reset Function
- During disc playback, if you press
button (9) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
- During disc playback, if you press
button (6) to switch to other mode,
and then return to DVD mode again, the
unit will resume playing from the point
that it was interrupted.
This unit is equipped with a sub-woofer
output jack. When a sub-woofer is
connects to this unit. Press
button
(10) repeatedly to select SUBW and then
rotate
button to turn sub-woofer
output on/off.
button on the housing must be
activated with either a ballpoint pen or
thin metal object. The
button (12)
is to be activated for the following
reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
If press
button(12), the unit can't
work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
disc socket.
MODE
VOL
VOL
RESET
RESET
Note:
RESET
8
