www.PyleUSA.com
5
Step 2:
Putting the brackets (B) on a flat table, then insert adjusting pole( C )
into brackets and locking screw tightly.
CAUTION:
You only need to insert the adjusting pole in the center of the two
brackets on this step. DO NOT twist the adjusting pole during the inserting process.
Step 3:
Attach TV Bracket (B) to the back of TV, choose corresponding bolt, washer
and spacer to fix the holes of TV rear. (Figure 4) If the back of TV is not flat, or the
bolts used to assemble TV are too long, or there is interfere between TV bracket
and cable inlets, we highly recommend you to use spacers.
CAUTION:
Using incorrect bolts may damage your TV.
Adjusting pole (C)
bolt
B
B
a \b
k\l
No!
Figure 4
