Maintenance
Maintenance filter
1.Remove the grille like indicated below
2. clear the dusty on the filter
Dry the filter sufficiently
neverinstall a moist filter in this projector,and complete
the installation
The filter should be cleaned at least once a month (more often
in dusty environments),or the projector will overheat
the step as follow
Projector installation
Front projection
ceiling mount
Front projection
Table mount
Rear projection
Ceiling mount
Rear projection
Table mount
Warning
1
This projector might damage beyond repair when it is incorrectly mounted on
a ceiling or when its incorrectly installed on a surface or installed on a
incorrect surface. It may also inflict damage to persons within close vicinity.
2)This projector can only be used in an environment with a temperature not
exceeding the range of 0- 35 degree .The projector may malfunction if
temperatures vary outside the normal operating range.
3
The sharpness of the screen might be interrupted when the
projector is being used in a dusty,wet,moist or smoke filled
environment. The projector might malfunction in a moist or wet
environment.
4
Take care of sufficient ventilation around the projector.
Otherwise this projecctor might overheat and cause life threatening
situations
Installation method:
Contact a proffessional service man to mount this projector to a ceiling.
Follow the instructions belowe for the correct projector positions:
screen
projector
screen
screen
screen
projector
projector
projector
Summary of Contents for PRJHD66
Page 1: ... ...
