background image

Specification

LCD           Model            5"TFT

Input signal       video           component video(Ypbpr)  ,VGA

HDMI

                                              TV
                          audio           stereo

output signal       audio            5W

2 speaker(select)

               
LCD            native resolution     640

480

support 576P, 720P

1080P)

                      contrast ratio          800

1

Lens           aperture            3.8
                   Focus            160mm

Lamp           Power            150W
                     Color-Temperature            9300K
                     Life           > 6000 hours
                     working time    < 24 hours

Image          size           60

100inch

               Brightness       1800 Lumens
               keystone         

20 degree

Power           Voltage         220

10 VAC

50Hz   or   110

10 VAC

60Hz 

                      power consumption            < 200W

Working condifition       temperature            0

+70

                                        humidity            10

65

store condition      temperature           -20

+70

                               humidity           10

90

Remote control    Frequency            38KHz

machine          size           298

210

120mm

                       weight           6Kg

If all parameter changed,donot note again

MODEL NUMBER

SERIES NUMBER

warning
    Please remember the model Number
     and series number if you need.
    And please check all accessories
    when you drop the carton package

Donot see the light from the lens ,it is high bright lamp.
It will damage your eye .specially for chirdren.

Warning:Donot place the projector in the wet condition,
avoid to getting an electric shock 

Warning

when close the projector ,the fans will continue to turn 90seconds.
Before pull out the power cable, please be sure the fans stop to turn .
Or it will damage the projector lamp

 The remote control battery should be fixed correctly ,
 Or it will damage the remote control.
 Make sure the remote control out of chirdren reach

About the remote control battery:

WARNING

When you use this projector , please read this manual carefully

WARNING

High Voltage,donot open it ,
except for professiona

It indicates there is a instruction
 for important operation

It indicates there is  a dangerous
 voltage

Summary of Contents for PRJHD66













Reviews: