www.PyleUSA.com
8
TROUBLESHOOTING
Check the following points before contacting a repair company.
Symptom
May caused by
Solution
No sound when
powered ON
1. No input sound source
2. Volume knob is in the lowest
position
3. Voice switch OFF
4. USB/MICRO SD card not plugged
1. Input AUX signal
2. Adjust volume
3. Turn on voice switch
4. Plug USB/MICRO SD card,
pIay MP3
Sound Distortion 1. Volume is too loud
2. Audio file error
1. Turn the volume down
2. Check and change the
audio file
No sound
comes from the
Microphone
1. Microphone socket may not be
plugged properly.
2. Microphone switch may not be on
3. Microphone volume is on lowest
mode.
1. Ensure the microphone is
correctly plugged into the
socket.
2. Turn on the microphone
3. Adjust the microphone
volume as per users wish
No sound comes
after inserting USB/
MICRO SD card
1. Incorrect file format
2. USB/MICRO SD card may not be
plugged in properly.
1. File format should be MP3
2. Plug USB/MICRO SD card
correctly
Charging adapter is not inserted
properly.
It will not affect the speaker
system. The light is only used
for indicating whether the
unit is charging.
Charging
indication - red
light flashing
when there is
low charge
1. Connect power cord to charge
2. Battery not fully charged
3. Battery life may have ended
1. Check if the power cord is
connected properly
2. Extend charging time;
normaIIy it takes 6-8 hour
to fully charge
3. Replace old batteries with
the same specification as
the old batteries.
Unable to
charge or the
battery works
only for short
duration
1. Mic switched ON but too close to
the speaker
2. Microphone switched ON but is
not being used.
3. Microphone volume is too loud
4. Mobile phone is too close to the
speaker
5. Other wireless equipments may is
placed very close to the speaker.
1. Keep the mic 2 meters
away from the speaker
2. Turn off mic if not in use.
3. Adjust microphone volume
to lower mode
4. Keep mobile away from the
speaker whilst attending a
call.
5. Keep speaker away from
other wireless equipment
Speaker makes
loud noises
