www.PyleUSA.com
www.PyleUSA.com
PLMRF65MW - PLMRF65MB
Installation Guide
PLMRF65MW/PLMRF6MB Installation
Ways to Connect
•
RF Wireless Audio Connection:
Install both speakers, as active powered speakers. Connect L and R Channel speakers, each to a 12V
power source. Then use pins to press the "
CH Set
" buttons, simultaneously to pair the speakers.
Upon successful power connection, the R Channel speaker LED indicator light will shine red -- and the
L Channel speaker LED indicator light will shine blue.
*Note:
Recommended power installation should include a 10 amp fuse between the power source
and speakers, ensure a proper and adequate power connection is established.
Bluetooth Audio Connection:
Once the speakers are installed and powered, the Bluetooth network name from your device list will
appear as 'PyleUSA'. Upon successful Bluetooth pairing connection you will hear a connection tone
and the speakers will shine with a blue LED indicator light.
Aux-in (External Audio Source) Connection:
The R Channel speaker features low-level audio input connectors to stream audio from external
devices. Upon successful aux audio input connection, the R Channel speaker LED indicator light will
shine green.
*Note:
The speakers must not be paired via Bluetooth wireless connection to allow Aux-in audio
mode.
Passive Speaker Connection:
Each speaker also has the ability to be used as a Passive-Type (un-powered) speaker. Ensure a proper
audio source connection is made via each speaker's 'Input Radio Speakers' connectors.
LED INDICATOR
Status
POWER ON
RCA AUX-IN Connection
Bluetooth Connection
Main Speaker ( R Channel)
2nd Speaker (L Channel)
BLUE
RED
GREEN
RED
BLUE
BLUE
BLUE
RED
RF Wireless Connection
I
II
III
II
Signal connection
as passive speaker
Signal connection
Using pins to push “CH Set” simultaneously
to get RF Wireless connection
as passive speaker
Audio Signal
Aux-In
(Follow on
Ways to Connect
)
III
(Follow on
Ways to Connect
)
III
“ Bluetooth
Pairing Tone”
1.“Turn on Bluetooth”
2.“Choose PyleUSA”
I
CH Set
CH Set
