Pyle PLMRDK17, User Manual

Page: 7 / 12

www.PyleUSA.com
7
OPERATION
SWITCHING ON/OFF THE UNIT
Press PWR button (5) to turn on the
unit. When the unit is on. Press and
hold for 2 seconds to turn off the
unit.
SOUND ADJUSTMENT
Press SEL button (2) shortly to select
the desired adjustment mode. The
adjustment mode will be changed in
the following order:
BAS - TRE - BAL - FAD - LOUD -EQ-
DX - STEREO -VOL
BAS: Bass
TRE: Treble
BAL: Balance
FAD: Fader
LOUD:
Loudness
EQ: Equalization
DX:
Distance
ST: Stereo
VOL:
Volume
By rotating the audio knob (2) it is
possible to adjust the desired sound
quality. Press and hold SEL for 2
seconds. You can choose the area
between USA and EUROPE by
rotating the knob (2).
EQ FUNCTION
In EQ item you can select the preset
EQ
mode by rotating the audio knob
(2) as below:
POP--CLASS ---ROCK ---EQ OFF
SHOW THE TIME
Press DISP button (10) to show the
time for several seconds. After
several seconds it will return to show
the information.
SET THE TIME
Press and hold DISP button (10) for 2
seconds the HH digit will flash.
Rotating the audio knob (2) to
change the hour. After that press
audio knob (2) the “ MM ” will flash.
Rotating the audio knob (2) to
change the minute. Then press DISP
button to confirm.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and
activated functions on the display .
LOCAL Function
Press
SEL
knob several times till
appear “ DX ”. Rotating the audio
knob (2) to switch it to local mode.
In LOC mode the unit will reduce the
receiving sensitivity when you
search station. That means you can
receive the station that sound is
good. It will ignores the station that
sound is not good. In
DX
mode it will
increase the receiving sensitivity
when you search the station. That
means you can receive more
stations.
STEREO /MONO Function
In
STEREO
item rotating the audio
knob (2) to choose STEREO or
MONO
mode. In
STEREO
mode you
can receive FM stereo signal. In
MONO
mode the stereo station will
be switched to monochrome.
Sometimes when the signal is not
good. If you change it to MONO
mode. The noise will be reduced.
AUXILIARY INPUT
The unit can be connected to a
portable audio player through the
AUX IN
jack (9).