6.
G-SENSOR
In video mode, if the car brakes suddenly or is hit heavily, the G-sensor will activate to prevent the current video
clip from being overwritten. There are three grades settings (high, medium, low) to cater to different car owners.
This file cannot be overwritten while loop recording.
7.
SOS
In video mode, press the MENU key to save the file manually. This file cannot be overwritten while loop
recording.
8.
Digital Zoom
In video/photo mode, press the UP key to zoom in on an image. Press the DOWN key to zoom out of an image.
9.
HDMI
Use your HDMI cable to connect to an HD television. Put the camera in standby mode to take photos or to view
the video.
10.
Tire Pressure Alarm
Connect a tire pressure detection module to the camera‟s USB port and turn on the camera. The LCD screen will
prompt you with the tire pressure interface when the camera detects something wrong with your tires. It will
inform you if the tire pressure is too high or too low, the tire temperature is too hot or cold, or if the transmitter
has low power or no signal. This interface will display the information of each tire separately on the LCD screen.
In standby mode, press and hold the MENU key to access the tire pressure interface. Press the MENU key to exit
the tire pressure interface. The tire pressure interface will not work if the camera is not connected to the tire
pressure detection module.
11.
Impact / Parking Monitor Mode
Turn on the Park Monitor function in the menu settings. If it is turned on, there will be a P icon displayed on the
LCD screen (it will no longer be there when this function is turned off).
The camera will automatically turn on and record for 10 seconds when it detects vibrations or impact (after the
recording, it will shut off). To turn on the Park Monitor function, you can press and hold the MODE button.
12.
Charger
This unit contains an AC Car Charger to charge and power your device while using your car.
13.
System Settings
In standby mode, press the MENU key in order to enter system settings. Press the UP/DOWN key to select the
setting item and press the ON/OFF key to enter into the sub-categories. Press the UP or DOWN key to select the
specific parameters; then, press the ON/OFF to confirm the change. To exit system settings, press the MENU key.