www.PyleUSA.com
1. ICONS
Sound recording on
Sound recording off
System beep on
System beep off
2. FUNCTION DESCRIPTION
Stop recording:
Make sure that the SD card is fully inserted or it will stop recording.
Normal recording:
In loop mode, whenever the recording time reaches user-set loop
recording time, a new file will be saved. When SD card capacity is full, current recorded
normal video file will overwrite the previous saved files.
SOS recording:
Once G-sensor detected value exceeds a given threshold value, it will turn
to SOS recording and current video will be saved as SOS file. In loop recording, SOS file is
saved as three video files(previous video, current video and next video when entering SOS
state), which will not be overwritten. When SOS recording is finished, it will return to normal
recording.
Auto power off after car stopped:
When the car is stopping and DVR under normal
recording mode, G-sensor will be detected and if G-sensor detected value not exceed
threshold value (This value is not same as event trigger value and cannot be set by user)
within 5 minutes, the unit will power off automatically.
3.BUTTONS
: Short press " off " to enter sleep mode.
OK:
Enter/Exit SOS recording
MENU:
Exit recording and back to main menu
MOTION DETECTION
Open motion detection function when car is stopping. When recording image changes,
it will turn to normal recording; when image is static again, it will continue recording and
turns back to motion detection state once it reaches motion detection recording time in
setting menu.
Motion detection image
14MP 12MP (4000 x 3000)
8MP (3264 x 2448) 5MP (2560 x 1920)
3MP (2048 x 1536) 2MP (1920 x 1080)
1.2MP (1280 x VGA (640 x 480)
3
Summary of Contents for PLCMDVR8
Page 1: ......
