www.PyleUSA.com
SYSTEM MESSAGE
No SD Card
In video recording or camera mode, if the unit does not detect
SD card, this picture and voice prompt will appear on screen.
Insert SD card, the prompt will disappear and you can start
recording or shootting photos.
SD Card has no storage space
In video recording or camera mode, if SD card has no storage
space, this picture and voice prompt will appear on screen,
and the recording will stop. Clean up SD card. It is suggested to
use a clean SD card for recording.
Preparing SD Card
Insert SD card, this picture prompt will appear on screen.
This prompt will disappear automatically when SD card is
ready. The time for preparing SD card is different due to
different SD card quality. When preparing SD card,
PLS DO
NOT
pull out the card.
Auto power off countdown
After setting auto power off time, when there is no external
power supply, the system will start the countdown and will
shutdown when the countdown ends. If external power
supply is restored during countdown, the auto power off
countdown will be canceled.
SD Card error
When SD card error message appears, try to remove it and
insert correctly again. If error message still appears after a
few times, pls check on PC whether the SD card is still good or
bad
Video file corruption
Do not disconnect SD card when recording video, it can cause
file corruption and playback failure.
SD card space is insufficient
Pls check SD card and do read and write test.
Auto shutdown after car stopped
When the car is stopping and DVR under normal recording
mode, G-sensor will detect and if detected value not exceed
threshold value(This value is not same as event trigger value
and cannot be set by user) within 5 minutes, the system will
emit a beep for 9 times, then unit will power off
Related operations being processed, please wait.
12
Summary of Contents for PLCMDVR8
Page 1: ......
