Pyle PL1SN104, User Manual, Page: 14 / 20

www.PyleUSA.com
13
Trouble
Radio
Weak signal
Disc/Card Reading
Break
-
down
during playing
Wrong information
is shown on the
panel
E
rror or not
operating
Disc cannot enter
the device Disc
does not play
SD card readable
by PC but
unreadable by
the device
Nonrepeat and
search function
while play VCD
Cause(s)
Auto antenna does not reach out completely
LOG function is under working state
Disc is stained or scratched; Documents or
records are damaged
The screen cannot display all the
information.
Illegal operation
There is disc already in side the devic. Disc
is not fully accepted.
The disk level surpasser the level setting of
Lock function; The area code of the disc is
not compatible; Disc is turned upside down.
Due to compatibility reasons of SD card
brand, not all of the SD card can be read
under the system. Or you may wrongly use
MMc card as SD card.
PBC service is functioning
Solution (s)
Connect auto antenna line correctly;
Close LOC function.
Clean or replace the disk; Replace the
disk or choose stored file
Hold the
E
J
E
CT key for 5 senconds to
reread the device.
Take out the disk inside the machine
and replace a new disc Transport the
screws
Adjust the level setting of Lock feature;
Use a compatible disk; Keep the side
with sign up when insert the disk.
The present system mainly support the
following SD card brands
:
San Dick,
KingMAX, Kingston, Panasonic,
Apacer etc.
Shut down PBC service
Turnover screen
Turnover screen
does not open
automatically.
No image
Unstable output
of images
Images being
stretched or
compression
Auto Open of turnover screen setting
is OFF.
Connection of brake wire is not correct;
Not brake state
DVD does not correspond with the present
system video setting;
Video signal line is not connected correctly.
Inappropriate image proportion setting
Auto Open»ON
Connect brake wire with cathode of
power supply correctly; Keep brake
state after car is placed safe.
Adjust system video setting;
Check and make sure of the
connectivity. Unsupported code
Adjust image setting