www.PyleUSA.com
4
www.PyleUSA.com
5
Wireless meeting microphone
This circle light is working, indicating the battery working when the transmitter
is switched on.
Power supply
Power consumption
Carrying frequency
Frequency stability
S/N ratio
Channel interference ratio
Dynamic range
T.H.D
Cartridge
Polarity
Frequency response
Sensitivity of transmission
Temperture
1.
Cartridge
2.
Working indicator
3.
Switch
4.
Power and low voltage
two color indicator
Operation
1. Please make sure to place the batteries correctly, connecting the correct
poles (+,-).
2. Power ON the switch
3. When not in use for long periods of time, Power OFF and remove the batteries
to avoid battery leakage.
4. Please change the batteries when the low voltage light indicator is ON
Front Panel
1. Power switch
2. Power Indicator
3. Volume Control
4. Receiving Indicator
Rear Panel
1. Antenna
2. Audio Output
3. Mixed-Balance Output
4. Balanced Output
5. DC Power
Operation
1. Please take the following working flow diagram for reference on using this
machine-connect the mix out of receiver with mic input on the amplifier or
out A, B, C, D and mic input on the amplifier.
2. Power 120V, switch the power, set the volume of your sound equipment.
3. Adjust the volume in right sound, make MIC1 and MIC2 harmony, which will
make you enjoying the sound well.
4. Please plug out the power if you will not use the machine long time.
DC9V
<35mA
170-270MHz
±0.002%
>90dB
> 80dB
>80dB
<3%
Condenser noise proof
Uni-direction
40Hz-18KHz( 3dB)
-47±3dB @1KHz
14-131°F (-10-55°C)
