www.PyleUSA.com
PLPTS25X2
Laptop/Notebook Stand
Universal Device Holder (Pair)
PREPARATION:
Remove the following parts from the box and identify all the parts:
NOTE:
The Stabilizer Bars
MUST
be
positioned at least 2 holes apart.
ASSEMBLING INSTRUCTIONS
1. Start by removing the end caps from the
two stabilizer rods.
2. Assemble the left/right support brackets.
Take one side of the upper supports and
match it with the corresponding side
lower support (the lower supports feature
anti-slip grip pad on the bottom)
- Figure A.
Align the mounting holes at the desired
height and position the Screw Knobs
through the supports (ensure not to over-
tighten).
-Figure B.
3. Repeat steps 1 & 2 above to assemble the
other side of the stand's support bracket
aligning the correct heights of the stabilizer
rods.
(4) Upper Supports
(4) Lower Supports
(4) Stabilizer Rods
(8) Screw Knobs
Figure A
Figure B
