9
Remote Control Operations
●
1. POWER
ON/OF (Same as ON/STANDBY)
●
2. TUNER
●
3. CD
●
4. TAPE A/B
●
5. VIDEO
●
6. AUX
●
7. PHONO
●
8. MASTER VOLUME CONTROL
(
▼
) For decrease volume output.
(
▲
) For increase volume output.
When the maximum volume level is reached, display will show “MAX VOL” and vice versa for minimum
volume.
Once the Amplifier is switched off, the volume setting will be stored and remain unchanged by stepping up to the
volume level before the Amplifier turned off.
9. EQ
To set the Amplifier into system mode or non-system mode.
10. NUMBERING
KEY
It can act as No. of songs for CD Player and No. of Channels of Tuner in non-system mode.
11. SET
CLOCK
SET CLOCK function can be activated within the TUNER Mode. Switch into the TUNER Mode first by selecting
the source key TUNER. Then press the SET CLOCK button to perform this function. Once the SET CLOCK key
is pressed, display will show the current time. Press HOUR < or MIN > keys to adjust the HOUR or MIN. And
press the + - button to adjust the value
12. SET
TIMER
(ALARM)
Select the SET ALARM button to activate this function. Press this button once to activate TIMER 1 (Fig.). Use
the HOUR or MIN keys to adjust the HOUR or MIN and press + - key to adjust the value. Press the SET ALARM
button the second to activate TIMER 2 to set the desired alarm time.
13.
PTY (It will be available if the unit has tuner with RDS.)
14.
APS ( it will be available if the unit has tuner)
Auto program search.
