4
Notes:
• If your receiver/amplifier has more than one set of speaker terminal (A and B), connect
only one or the other to the control center.
• For the best results, we recommend
1
4-gauge, two conductor speaker wire (not
supplied) for most connections. If you plan to located the speakers further than 80 feet
from the control center, use a heavier gauge of wire.
OPERATION
Caution:To avoid damaging your receiver/amplifier, set its volume to the lowest setting
before changing the control center’s settings.
To turn on a pair of speakers connected to the control center, simply press in the desired
button. For example, to turn on the set of speakers connected to SPK A, press A.
To turn off a pair of speakers, press the button again so it is in the “out” position.
Note:if no speakers are connected to a set of terminals, do not press in the corresponding
control button.
