3
UHF PROFESSIONAL TRUE DIVERSITY WIRELESS MICROPHONE SYSTEM
2XPLL 16CH
RISK OF ELECTRIC
SHOCK DO NOT OPEN
UNBALANCED OUTPUT
BALANCED OUT
DC INPUT 17V
1. Power Switch
2. SET: press once to adjust CH-A frequency,
press again to adjust CH-B frequency.
3. UP: Channel up
4. DOWN: Channel down
5. ESC: press to escape set-up. Channels will
be locked.
6. LCD display panel
7. Volume Control
8. Antenna
9. 17V DC input
10. Balanced output
11. Unbalanced output
PARTS DESCRIPTION
1. Pull out the antennas A and B.
2. Insert one end of attached audio cable into "MIX" on rear panel,
and the other end into MIC IN or AUX IN of amplifier or mixer.
3. Connect the power adaptor from DC 17V of receiver to a main
power socket.
4. Switch on the receiver. Power indicator comes on. LCD display will
display CH no., frequency, AF level and RF level.
Make sure they are completely
extended and vertical.
OPERATION
5. Press SET once, there will be a to display on CH-A LCD panel.
Now you can adjust CH-A frequency by UP/DOWN button. Press
SET again to adjust CH-B frequency.
6. Press ESC to escape set-up. The channels will be locked.
7. Switch on the microphone. Letter A will display on the left top side
of the LCD panel. This indicates that signal is received. W
display on the bottom of
LCD panel.
hen you
speak into the microphone, AF signal will
CH00 731.2MHz
00dB AF
CH00 795.2MHz
00dB AF
