Pyle Pro PDWM9300 Operation Manual Download Page 2

1

Precautions

Hand-held microphone

Receiver

Installation

Trouble shooting

Specifications

Thank you for buying the PDWM9300 Wireless System.

 Please 

read through these operation  instructions so  you  will  know  how 
to operate  your model properly.  After you read it,  put  it away in a 
safe place for future reference.

Avoid exposure of the system to rain or moisture. 

No user-serviceable parts inside the system.  Refer all servicing to a qualified 

    technician only. 

Handle the  wireless system carefully, dropping or other shocks may cause

    failure. 

Avoid using the system where it may be subjected to heat, such as direct sunlight, 

    near radiators or other heat sources. 

Should any liquid be spilt on the system, stop using it immediately. It may be 

    possible to dry the system, but you should have it checked by a qualified technician 

    before using it again. 

Take care with the main power adapter and lead. If damaged in any way, do not use

    the system and refer to a qualified technician for repair. 

Only use the system with the supplied components. Do not attempt to use with any 

    other main power supply adapter . 

If the 

 is not going to be used for a while, remove the battery to 

    prevent leakage. In the event of electrolyte leakage inside the battery compartment,

    carefully remove the leakage with a damp cloth. Take care not to get battery 

    electrolyte in contact with your skin, however if it does, wash your hands under a 

    running tap. If electrolyte comes into contact with your eyes, seek medical advice 

    immediately. 

Only replace the battery with the same or an equivalent type.

Please dispose of old batteries in an environmentally friendly manner in accordance 

    with the relevant legislation.

Do not use any solvents to clean any part of the 

.

 

 wireless system

wireless system 

Summary of Contents for PDWM9300








Reviews: