Instruction
“ON”: Power is on
“OFF”: Power is off
Usage
1. Connect the silicon tip to the hearing aid ( Figure 1)
2. Turn the switch to
“ON” position (Figure 2)
3. Plug the hearing aid into your ear and adjust the volume as you like (Figure 3)
Figure1 Figure2 Figure3
Maintenance
If you can
’t hear from the hearing aid, please check the following steps:
● If the power is switch on
● If the battery power has been used up, please recharge it
Keeping Method
The hearing aid should be kept in the room
1. Where is dry and well ventilated
2. Where the relative humidity is less than 80% and there is no corrosive gas
RECHARGEABLE INSTRUCTION
Important Notes:
1. The hearing aid can only be charged with the matching charger (1.5V/8ma). And it is
forbidden to charge the machine by other chargers or connecting to computers.
2. The capacity of the Ni-MH battery of hearing aid is 1.2V/40mah and it can work about
24hrs continuously after fully charged
3. Don
’t keep the hearing aid in the environment of over high or low temperature
4. The battery has its life period, if you find that it doesn
’t perform well, or can’t maintain its
usual operation, changing the new battery of the same code as replacement.
5. It is of low current and power saving
6. With the ON and OFF switch, it is energy saving at the furthest
