WARNINGS RELATING TO THE USE OF BATTERIES
•
Batteries must be inserted taking care to match the polarities shown. Make sure that the (+) and (-) terminals
are placed in the right direction.
•
Never use batteries that show signs of electrolyte leaks or cracking.
•
Never dispose of used batteries in an open fire.
•
Keep batteries out of reach of children.
•
Never recharge disposable batteries.
•
Never shot circuit battery terminals.
•
Do not try to open the batteries.
•
Do not mix up different kind of batteries or new and already used batteries together.
•
Only use batteries of the recommended or equivalent type.
•
Remove batteries from the appliance before disposing of it at the end of its service life.
•
When replacing used batteries, please comply with applicable regulation relating to their disposal.
•
Please return them to a suitable collection facility for environmentally friendly disposal.
FEATURES
1. AM/ FM/ ON/ OFF
2. HOUR/ TU-
3. MIN/ TU+
4. SET/ PRE/ M+
5. AL 1/ VOL-
6. AL 2/ VOL+
7. SLEEP/ SNOOZE
DIMMER HI/ LOW
8. DISPLAY
9. SPEAKER
The normal function of the product may be disturbed by strong electro magnetic interference. If so, simply reset
the product to resume normal operation by following the instruction manual. In case the function could not
resume, please use the product in other location.
CONNECTING THE RADIO
Plug the AC Cord into the power outlet. When electrical power has been interrupted and restore, the clock
display will blink. Make sure to reset both the correct time and alarm for proper operation.
BATTERY BACKUP
This clock has a backup power system to ensure continuous operation during power failure. A 9 Volt battery (not
included) is required. It is recommended that the set be disconnected from the mains supply while the battery is
fitted. You must put in a battery to ensure the battery backup feature is ready in case of power failure. If power
fails, the back up battery will automatically continue operation of the clock and maintain actual time. However,
the display will not be lit. During actual power failure the alarm function will not be operational. When electrical
