Pycom FiPy Manual Download Page 96

Page: 96 / 496

Selecting the

Applications

tab at the top of the TTN console, will bring up a screen for

registering applications. Click register and a new page, similar to the one below, will open.

Enter a unique

Application ID

as well as a Description & Handler Registration.

Now the Pycom module nodes can be registered to send data up to the new Application.

Register a Device

To connect nodes to a things network gateway, devices need to be added to the application.

To do this, navigate to the

Devices

tab on the

Application

home page and click the

button.

In the

panel, complete the forms for the

Device ID

and the

Device EUI

The

Device ID

is user specified and is unique to the device in this application. The

Device

EUI

should be a globally unique identifier for the device. You can run the following on you

Pycom module to retrieve its EUI.

1.4.3.2 The Things Network

Summary of Contents for FiPy

















































































































































































































































































































































































































































































































Search results

Summary of Contents for FiPy

Reviews:

Pycom FiPy, Manual, Page: 96 / 496

Search results

Summary of Contents for FiPy

Reviews: