Pycom FiPy Manual Download Page 88

Page: 88 / 496

Registering with Sigfox

To ensure the device has been provisioned with

Device ID

and

PAC number

, please update

to the latest firmware.

In order to send a Sigfox message, the device need to register with the Sigfox Backend.

Navigate to

https://backend.sigfox.com/activate

to find the list of Sigfox enabled

development kits.

Select

Pycom

to proceed.

Next choose a Sigfox Operator for the country where the device will be activated. Find the

specific country and select the operator to continue.

1.4.1 Sigfox

Summary of Contents for FiPy

















































































































































































































































































































































































































































































































Search results

Summary of Contents for FiPy

Reviews:

Pycom FiPy, Manual, Page: 88 / 496

Search results

Summary of Contents for FiPy

Reviews: