1
Description
Driver LED 3 x 700mA with built-in DMX512 signal receiver is designed to
control LEDs. The built-in DMX receiver allows for activating 3 channels (R, G,
B) by using directly the DMX protocol. The device has been placed
in a
housing adapted for mounting on a 35mm DIN rail. A wide range of supply
voltage and a high level of current-carrying capacity enabled activating large
quantities of LEDs.
PX781 can be controlled by the DMX signal or it can work independently.
In this operation mode, the user has access to a fully programmable stage
and 18 default sequences for which can be also change the reproduction
speed and the smoothness of transition of particular steps. With the use of
16-bit resolution, controlling the parameters of channels is completely
smooth. Moreover, the driver offers an effect control mode which allows for
controlling the programs that are built into the device and, at the same time,
changing such parameters as speed, brightness and fade settings using the
DMX512 signal sent from an external controller.
The driver offers a built-in control signal frequency tuning system (“
flicker
free
” technology), which makes it useful in applications for the television
industry. As LEDs from the RGB series often differ in parameters, problems in
receiving white color may occur (triggering 100% at all channels). This is why
the PX781 has been equipped with a very useful feature called “white
balance”. With this feature, each set of LEDs can be adjusted so that the
control of individual colors by the module enables achieving white color at full
4
