10.1 RESET button operation and restoring default
settings
Action
Reaction
Holding down the button when
the power supply is turned on
Switching the device to the core
mode
Holding down the button for 2
seconds when the device is
in the core mode
Switching the device to the normal
operating mode
Holding down the button for 5
seconds when the device is
in the core mode
Uploading a configuration from
the built-in memory to the device
Holding down the button for 5
seconds in the normal operating
mode
Network settings reset – signaled
by lighting up the DMX diode
and the POWER diode
Holding down the button for 10
seconds in the normal operating
mode
Reset of all settings (including
the name of the controller), ADMIN
account password and erasing
the configuration uploaded into
the device – these are signaled by all
the six indicator diodes illuminating
NOTE! Default parameters are:
IP: 192.168.0.50
Mask: 255.255.255.0
Gate: 192.168.0.100
Device name: [serial number]
ADMIN account password: [serial number]
35
