6. Click on “
Search
”, the controller should be displayed on the list.
7. Select the controller from the list and click on “
Login
” (leave the
password blank).
8. Click on “
Upgrade Firmware
”, select the
*.upg
file with upgrade and
click [OK].
9. After the upgrade, the controller should automatically reset.
10 Restoring default settings
To restore default settings during the normal operation of the device,
press the physical button located on the device housing and hold it for 5
seconds (see figure below). If the DMX indicator lights for 2 seconds, it means
that default settings are restored.
Then, it is recommended to turn off and on the power supply.
If default settings are restored, it will delete the created setup, users and
network configuration.
Default network configuration will be restored:
•
IP address: 192.168.0.50
•
subnet mask: 255.255.255.0
•
DHCP: enabled
31
button for the restoration
of default settings
