1. GENERAL DESCRIPTION
1
PX206 module is the 8-channel electronic digital switch with the 1A maximum load of each output.
It allows to switch the stage effects or architectural illuminators through the DMX-512 control
signal. PX206 module is powerd with 12 -24V external supplier and controls 12 - 24V outputs.
Manufactured in dedicated case module is ready for direct mounting with standard electric boxes
35 mm DIN rails.
8 outputs of PX206 are controlled through DMX signal. The device menu allows to program the
DMX address for each of the output channel and select PX206 reaction to DMX signal absence or
interruption. The switching method include histeresis protection against unstable operation near
switching levels.
The device is equipped with the separate DMX-512 signal input and output. It is manufactured in
a 70mm wide casing.
2. SAFETY CONDITIONS
Electronic switch PX206 is powered with safe voltage 12 - 24V; however, during its installation
and use the following rules must be strictly observed:
1. The device may only be connected to 12 - 24V DC current (stabilized voltage) with current-
carrying capacity compatible with technical data.
2. All the conductors should be protected against mechanical and thermal damage.
3. In the event of any conductor damaging, it should be replaced with the one of the same
technical data and attestations.
4. Connection of DMX signal should be made with shielded conductor.
5. All repairs and connections of outputs or DMX signal can only be made with power off.
6. PX206 should work
7. PX206 should be strictly protected against contact with water and other liquids.
8. All sudden shocks - particularly dropping - should be avoided.
9. The device cannot be turned on in places with humidity exceeding 90%.
10. The device cannot be used in places with temperature lower than
or higher than
.
11. Clean with damp duster only.
inside the standard, closed trusses.
o
o
2 C
40 C