PXM PX163+, User Manual

Page: 9 / 30

5.1 Button features
escape – goes back to the previous MENU level or discards changes made
previous – scrolls to the previous feature on the same MENU level or
decreases the parameter's value
next – scrolls to the next feature on the same MENU level or increases the
parameter's value
enter – enters the next MENU level and confirms changes made
5.2 Group DMX address settings
The menu of the PX163+ driver allows for setting the DMX address within
a range between 1 and 464 / 508 depending on work mode of device. For
example in
48 mode it occupies 48 consecutive DMX addresses. If start
address is set to 400, the last channel is occupied by address 448.
To set the DMX address
:
1. Set the Adr function.
2. Use the “ next ” or “ previous ” buttons to set the selected DMX address.
3. Push the “ enter ” button to confirm choose.
NOTE! Programming the DMX address in this way cancels the previous
individual settings of each channel (does not apply to the dimmer address)
9
ENTER ENTER ENTER
NEXT