Pro Video instruments
VUMATRIX FX HDMI OVER IP MATRIX EXTENDER QUICK START GUIDE
2
CONFIGURE TRANSMITTER OUT OF BOX
USING REMOTE CONTROL:
1)
Power on the unit by connecting the power supply cable. Allow the unit 2 minutes to boot, until the ON
LED light is lit solid green, and the On Screen Display shows a number (Transmitter ID, 0 by default).
2)
On the Remote, press the POWER and 7 keys together to put the remote in Transmitter Mode.
3)
On the Remote, set your Transmitter ID by pressing the UP or DOWN arrow keys, or enter the ID
number you wish to use, then ENTER to confirm. Each Transmitter needs to have its own unique ID.
USING ONBOARD KEYS:
1)
Power on the unit by connecting the power supply cable. Allow the unit 2 minutes to boot, until the ON
LED light is lit solid green, and the On Screen Display shows a number (Transmitter ID, 0 by default).
2)
Set your Transmitter ID by pressing the “+” key to increase, “
-
“ to decrease, and “+” and “
-
“ together to
lock in. Each Transmitter needs to have its own unique ID.
