19
Configuring the VuMATRIX Receivers
NOTE
Before you start programming your receivers you need to fill out the included Receiver Network
Map. This will be your complete guide for programming all your receivers. The IP addresses will
start at 192.168.0.151. Below is an example of a sample Receiver Network Map.
SW version: A6.3.1 Build 2161
VuMATRIX 4K IPTX Receivers
Transmitter #
IP ADDRESS
DEFAULT TX ID
(TX HOST ID)
Receiver Names
BELOW IS AN EXAMPLE OF WHAT YOU FILL OUT
1
192.168.0.151
0001
Living Room1
2
192.168.0.152
0002
Bedroom 1
3
192.168.0.153
0003
Game Room 1
4
192.168.0.154
0004
Game Room 2
5
etc
etc
etc
*****VERY IMPORTANT NOTE*****
Every single Receiver
MUST
have a different IP address. If this configuration is not completed,
the Receivers will not function properly and will not communicate across your network.
NOTE
The DEFAULT TX ID is the default transmitter the receiver will connect to when started
This HOST ID is programmed in each transmitter, as per the chapter above in this manual.
Receiver Network Map
IMPORTANT
: Please compile this table with your receivers IP / Default transmitter they point to
at the start / reference name for the receiver, as this will be very useful later when
programming the control software
SW version:
VuMATRIX 4K IPTX Receivers
Transmitter #
IP ADDRESS
DEFAULT TX ID
(TX HOST ID)
RECEIVER Names
1
2
3
4
5
6
7
Co
n
fig
u
rin
g th
e
VuMA
TR
IX
R
e
ceive
rs
Summary of Contents for VuMATRIX 4K IPRX LE
Page 39: ...39 Warranty Warranty ...