Copyright 2017 ProVideoInstruments USA
– All Rights Are Reserved
Page 13 / 24
Figure-6
➢
TS Config→Stream select:
From the menu on up side of the webpage, clicking
“Stream select”, it displays the
interface where users can select program(s) to multiplex out and modify program
info. (Figure-7)
Figure-7
Configure
‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’.
Instructions are as below:
: To add input channel which can from GE1/GE2/Connector
: To edit the input channel
Input Area
Output Area
Operation Area
