PVI VeCOAX Micromod MS, Reference Manual

Page: 13 / 25

CHAPTER 4 Operations and Management
MICROMOD is controlled and managed through the key board and LCD display.
LCD Display – It presents the selected menu and the parameter settings. The backlight
in the display is on when the power is applied.
LED – These lights indicate the working status
Power: It lights on when the power supply is connected.
Alarm: It lights on when the there is error, such as the signal source loss.
Lock: It lights on when the signal source connected and goes off when the signal
lose.
Left/Right/Up/Down buttons – Use these buttons to turn the screen pages, shift the
target items by moving the triangle, or change the parameter settings in the program
mode.
Enter – Use this button to enter a submenu or save a new setting after adjustment;
press it to start adjusting the value of certain items with Up/Down buttons when the
corresponding underline flash;
Press it to activate the hidden selections and change the setting with Up/Down (or Left/
Right) buttons.
Menu – Press this button to step back
Lock – Locking the screen / cancelling the lock state, and entering the main menu after
the initialization of the device. After pressing lock key, the system will question the users
to save present setting or not. If not, the LCD will display the current configuration state.