PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A
Adjustable Threshold Ramp
1
B
Leveling Base
2
B
A
PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A
Adjustable Threshold Ramp
1
B
Leveling Base
2
B
A
PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A
Adjustable Threshold Ramp
1
B
Leveling Base
2
B
A
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2
2
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that ramp is pressed firmly against the step or platform before using.
•
When possible, use the provided flat head pan screws (BB) provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height
of step/platform not to exceed 2 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
Hex
Nut
Qty. 2
AA
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2
minutes
Tools Required for Assembly (not included): None.
Helpful Tools (not included): Drill with 3/16 bit (wood, metal, or masonry depending on what type of
surface you will be drilling pin holes into); Pen/Pencil
BB
Flat Head
Pan Screw
Qty. 2