SJ100 PVA
Revision C (2019)
7 of 26
Theory of Operation
The SJ100 valve is a non-contact dispense valve that applies small shots of fluid as
individual dots or in rapid succession. Only three components come in contact with
fluid: the fluid body, needle, and nozzle. With this design you can dispense at speeds up
to 140Hz. The SJ100 is designed to dispense coatings and other low viscosity materials
with very fine control.
Personal Protective Equipment
Operators must use eye protection because material contents are under pressure.
Always wear gloves when handling materials and solvents. Refer to MSDS sheets on the
material being dispensed for other precautions.
Waste Disposal
Dispose of all used parts and materials in accordance with local laws and regulations.
