SB300 PVA
Clean the Valve Components
5.3
Use a compatible solvent to clean the valve components. All components should be
cleaned and there should be no material on valve components.
1.
Examine and clean all of the O-rings (19, 20, 21, 22, 23, 24).
2.
If there is any wear or damage, replace the O-ring.
Figure 32: Examine O-rings
3.
Examine and clean the lip seals (11, 12).
4.
It they are damaged or show wear, replace the lip seals.
Figure 33: Examine Lip Seals
End Cap
5.3.1
Clean the end cap (10). Use cotton tipped swabs, lint free wipes, and solvent.
Figure 34: Clean End Cap
REVISION A (2014)
22 of 50
