BI2000 Board Inverter Manual
Revision F
/
February 2020
Page 32 of 37
Width Adjustment
To adjust the width of the rear conveyors on units that do not have the “Auto Adjust”
option, perform the procedure below.
Note: This is for systems that do not have automatic width adjust.
1.
Engage the “
Emergency
Stop
” button.
2.
Turn the main air pressure to “
Off
”.
3.
Turn the adjustment lock counterclockwise to loosen it.
Figure 31: Adjustment Lock
4.
Turn the adjustment handle counterclockwise to increase the width or clockwise to
decrease the width of the of the conveyor.
Figure 32: Width Adjustment Handle
5.
When the necessary width is achieved, turn the adjustment lock clockwise to tighten.
