BI2000 Board Inverter Manual
Revision F
/
February 2020
Page 16 of 37
Auto Cycle
Auto Cycle is the normal operating mode for the PVA board inverter. In Auto Cycle, the
machine operates as part of a production line and interfaces with any adjacent machines.
1.
Select Auto Cycle from Cycle Stop.
2.
Push the “
ESC
” button to leave Auto Cycle and return to Cycle Stop.
Figure 9: Auto Cycle
Note: The board inverter will wait for the boards to exit if there are boards in the
inverter when the “ESC” button is pushed.
3.
To change the settings shown in Auto Cycle, go to Setup Mode.
4.
The Profile is shown above the screen name. Go to Setup mode to change the
profile.
5.
The current conveyor speed is shown.
6.
The text field shows information about board handling and processing.
7.
The SMEMA indicators show the signals being sent and received. Output from the
system are in the box, external signals are outside of the box.
Manual Mode
In Manual mode, the operator has control of the conveyor, flipper, and SMEMA signals.
1.
Select Manual mode from Cycle Stop.
2.
Use the “
Left
”, and “
Right
” arrow buttons to scroll through the screens.
