Nozzle Options
The FCM100 valve is available with several different gauge size dispense nozzles
(17). Different nozzle sizes are easily interchangeable to the valve by removing the
nozzle lock nut (12). Nozzle sizes are selected based on the size dot or bead of material
that is to be applied. A 22 gauge nozzle will give you the largest dot and wider bead
width while the 30 gauge nozzle will offer the smallest dot size and smallest bead width.
Valves are supplied from the factory with one nozzle included. Below is a chart
showing part number that are used to specify the nozzle that is supplied with a valve, the
available gauge sizes, inside diameters of the nozzles, and part number for each
individual nozzle.
Valve Part Number Nozzle Size Nozzle ID Nozzle Part Number
FCM100-22G
22 gauge 0.016”
PV-22005A
FCM100-25G
25 gauge
0.010”
PV-25007A
FCM100-27G
27 gauge
0.008”
PV-27005A
FCM100-28G
28 gauge
0.007”
PV-28004A
FCM100-30G
30 gauge
0.006”
PV-30001A
Safety
Due to material contents being under pressure eye protection is required for
operators. Refer to MSDS sheets on material being dispensed for other precautions.
Summary of Contents for B12-1788
Page 9: ......